Leading Dust Extraction Experts with 25 years Experience. Buy Online or Call For Advice: 01227-751114

CORMAK HBS210 400V band saw
CORMAK HBS210 400V band saw
CORMAK HBS210 400V band saw
CORMAK HBS210 400V band saw
CORMAK HBS210 400V band saw

CORMAK HBS210 400V band saw

Regular price
Sold out
Sale price
VAT included
Quantity must be 1 or more

The CORMAK HBS210 band saw, thanks to the equipment with a hydraulic cylinder, cooling and a swivel arm up to 60 °, in combination with the blades of the renowned German company Rontgen, is widely used in all locksmith workshops where precision, quality and cutting speed are important. ONLY WITH US THE CUTTER HAS A REINFORCED ARM WITH INCREASED STIFFNESS.

Machine description

The horizontal band-saw for metals, with a swivel arm, enables cutting in a plane perpendicular to the axis of the cut material and at any angle in the range from 0 to 60 °. The drive from the electric motor to the wheel driving the cutting band is transmitted by a motor with a MECHANICAL gear (not belt). The cutting band is tensioned on two cast iron wheels by a manual tensioner and guided through a set of bearing rollers.

The material to be cut can be fed manually or with any mechanical device, while the tool feed is performed by gravity on the principle of oil flow in a two-chamber hydraulic cylinder. The appropriate speed of the arm drop is obtained thanks to the valve regulating the oil flow between the chambers. The belt guides are equipped with a set of bearing rollers. This has a huge impact on the belt guiding, its service life, straightness, accuracy and quality of the cut.

The appropriate cutting speed (belt speed) is obtained by changing the position of the button on the control panel. The appropriate cutting speed should be selected for the individual types and grades of material. The rigid arm is made of PROFILED CAST IRON . There is a control panel at the arm.

The base is built as a rigid body welded from steel sheets. Inside there is a separate coolant tank with an electro pump. The design of the upper part of the base provides a basin for draining the coolant and catching the chips produced during cutting the material. cast iron working table with a swivel arm and a control panel on a separate arm is attached to the base In the cutting process, the main cutting movement is the movement of the cutting band and the movement of the lower arm. The speed of the arm drop (cutting speed) is regulated by a hydraulic actuator.

The feed rate is regulated on the cutter control panel. We can choose between two speeds of the cutting band: 32.5 and 65 m / min . In the lower position of the arm (after cutting the material), the saw band drive is automatically turned off. Safety will be ensured by the cutting band covers and micro switches stopping the engine's operation after the end of the cutting cycle or opening any of the covers, additional protection consists in switching off the cutter automatically in the event of the cutting band breaking.

Technical specifications


2110 x 0.9 x 20 mm


S1 100%: 0.75 kW


400V 50Hz


32.5 / 65 m / min (50 Hz)


173 kg


1150x560x930 mm


Max. cutting range [mm]




170 x 210

170 x 170



140 x 140

140 x 140



110 x 110

110 x 110



60 x 60

60 x 60