Leading Dust Extraction Experts with 25 years Experience. Buy Online or Call For Advice: 01227-751114

CORMAK HBS320 band saw
CORMAK HBS320 band saw
CORMAK HBS320 band saw
CORMAK HBS320 band saw
CORMAK HBS320 band saw

CORMAK HBS320 band saw

Regular price
Sold out
Sale price
VAT included
Quantity must be 1 or more

CORMAK HBS320 - for two-sided cutting at an angle in the range from - 45 to + 60 degrees. The design of the device is based on the solutions and projects of Polish engineers. Precision and accuracy of workmanship put it at the forefront of band saws with the possibility of cutting up to 320 mm wide. The advantage of the machine is the latest generation hydraulic cylinder. The machine has a reinforced vice base and a vice with a quick clamping function.

Characteristics of the machine

CORMAK HBS320 metal band saw enables cutting of material at any angle in the range from - 45 ° to + 60 degrees. The cut element can be fed manually or through any feeding device. The feed during cutting is gravitationally based on the principle of oil flow in a hydraulic cylinder. The operator starts the machine by pressing the start button and sets the cutting speed. After the cycle is complete, the machine automatically stops and the operator raises the arm to the starting position. The arm of the cutter is made of a very massive, uniform cast of gray cast iron with the use of a cutting band with a width of 27 mm, which enables the full performance of multi-series cuts in structural steel, stainless steel and tool steel. The vice is placed on an adjustable bed and equipped with a quick clamp. The saw blade guides are equipped with a system of rolling bearings and sintered carbides ensuring perfect precision and straightness of cutting. This has a huge impact on the belt guiding, its service life, accuracy and cutting quality. Carbide guiding significantly reduces the wear of the machine and the saw blade. The base is built as a rigid body welded from steel sheets. Inside there is a separate coolant tank with an electropump. The design of the upper part of the base provides a basin for draining the coolant and catching the chips produced during cutting the material. A work table with a torsion arm on both sides and a control panel is attached to the base. The feed rate is regulated on the cutting machine's control panel. We can choose between two speeds of the cutting band: 44 and 88 m / min. In the lower position of the arm (after cutting the material), the saw band drive is automatically turned off. Safety will be ensured by the cutting band covers and micro switches that stop the engine's operation after the end of the cutting cycle or opening any of the covers, additional protection consists in switching off the cutter automatically in the event of the cutting band breaking.


Technical data


260 mm / square cut


320 x 160 mm / perpendicular cut


3 phase 400V


2.1 kW


hydraulic cylinder


2740 x 27 x 0.9 mm


Stepless 0-50 m / min


44/88 m / min


920 mm


1400 x 880 x 1550 mm


330 kg


Cutting parameters



320 x 160

255 x 255

45º R


210 x 200

210 x 210

60º R


135 x 130

130 x 130

45º L


220 x 130

160 x 160