This planer is designed for soft and hardwood. Its robust cast iron design ensures silent and vibration-free operation.
Switching from planing to thicknessing is very quick and simple. It is based on unlocking eccentrics and lifting tables, as well as relocating chip extractor cover, A hand wheel for planing thickness is located on the right side of the machine, an aluminium swinging rule with a graded pitch can be precisely set at an angle within 90 – 45o, Thicknesser table mounted centrally on a column, equipped with a hand wheel for upward and downward setting, Planing height measured with a graded strip.
|
TECHNICAL SPECIFICATION |
PT310 |
|
Knife shaft diameter |
70 mm |
|
Knife shaft speed |
5500 rpm |
|
Extracting connector diameter |
120 mm |
|
Swinging rule tilt angle |
0–45° |
|
Number of knives |
3 |
|
Maximum planer width |
310 mm |
|
Maximum thicknesser width |
308 mm |
|
Maximum planing height |
5–225 mm |
|
Maximum thicknesser machining depth |
2.5 mm |
|
Maximum planer machining depth |
4 mm |
|
Thicknesser feed speed |
6 m/min |
|
Planer table dimensions (L×W) |
1300×310 mm |
|
Weight |
250 kg |
|
Motor speed |
2800 rpm |
|
Motor power |
3.0 kW |
|
Power supply |
3-phase, 415V |