Description
Cormak RBM 65HV Section Rolls
Description
Electric bending machine for bending tubes, profiles, rods and flat bars, dependent on the rollers equipped. Perfect for bending arches, rings, spirals, etc. Used in iron working shops and on construction sites. Maximum tubes bending range up to 100 mm. A foot pedal for left/right rotation control included in the set.
Features
Electric bending machine for bending profiles and tubes. Equipped with a mechanically adjustable upper roll clamping. Perfect for bending arches, rings, spirals, etc.
Bending radius adjusted with an installed on the top of the machine clamping device equipped with a Vernier scale
Area of application: bending profiles and tubes bending
Capable of bending various profiles due to its universal rollers
Its bulkiness provides optimum stability
Ground and hardened lateral guiding rollers
Bending shafts of durable and tempered steel
Controlled with a foot pedal
Left/right operation
Using the set of special rollers the bending range increases up to 100 mm
Technical Details
Shafts diameter: 65 mm
Motor power: 3 kW
Spindle speed: 9.3 rpm
Dimensions: 1250 × 1150 × 1800 mm
Weight: 730 kg
Standard Equipment
Lateral guiding rollers
Foot pedal
Various sets of shafts
User manual
EC declaration of conformity
Capacity
Rectangular Solid Bar: 80 x 25mm
Flat Bar: 120 x 25mm
Square Solid Bar: 50 x 50mm
Angle Iron: 70 x 6mm
Box Section: 70 x 70mm x 3mm Wall
Tube/Pipe: 50mm Diameter x 3mm Wall
Specifications
Manufacturer | Cormak |
Model | RBM65HV Section Rolls |
Condition | New |
Shafts diameter | 65 mm |
Motor power | 3 kW |
Spindle speed | 9.3 rpm |
Weight | 730 kg |